Some notes:
- The installation Order of Operations for the diff are
- Loosely install lower rear cross-bolt and spacers in the differential.
- Lift differential in to cat nose/flange first, loosely bolt-in the nose.
- Lift differential rear, insert the upper rear bolt.
- Torque everything to spec.
- Spacers are required:
- After a little trial and error I found that I need 15mm spacers.
- A stack of 6 M12 washers pack out to ~14.5MM.
- McMaster-Carr sell M12x15mm aluminum spacers
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.