Thursday, August 20, 2020

Project-Zero: Build Timebox 8.18.2020


Another day, another timebox VLOG thing.

Not a whole lot, managed to get the front right control arm set installed and shimmed up. That was kind of a fight but it's done now.  I need to revisit the other side and re-shim the arms on that side.

The M14 bolts on the upper rose joints require a 12mm hex key. The largest that I had in my tool set was an 10mm hex key. Harbor freight to the rescue.

The next set of tasks will involve installing the hubs, brakes, and shocks on the front and making sure that everything is torqued snug.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.