Originally I thought I might put the ECU on top of the transmission tunnel behind the aux switch panel but have since come to a different opinion on placement. Instead I’m flying it on the passenger’s side of the scuttle/dash area mounted to a plywood tray/shelf.
The shelf is a piece of 1/8" plywood mounted with a few 3D printed brackets. (PETG) The plywood was a 1’x1’ sheet sourced from the local hardware store, fit into place and then cut down as needed. It has ended up as a kind of funky shape but it works and finished off with some black paint it doesn’t even look that weird.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.