Wednesday, July 29, 2020

Project-Zero: Bushings, Part 2

Dirty update about installing bushings. 

The bushing tubes should be slightly recessed vs. the shoulders of the bushings. I didn't realize this until after I'd pressed in a few of the bushing tubes. Aping instructions offered by Richard Lincoln, I've fixed replaced them so they're no longer standing proud of the bushings. In the video I say trim 1-1.5mm but 1mm should be just fine, mostly. 

Repeat for all of the other bushing tubes in the control arms and pedal box until you're done.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.